17
2. Projecting an Image (Basic Operation)
❹
Selecting a Source
Selecting the computer or video source
NOTE: Turn on the computer or video source equipment connected to the projector.
Detecting the Signal Automatically
Press the SOURCE button once. The projector will search for the avail-
able input source and display it. The input source will change as follows:
COMPUTER
→
HDMI1
→
HDMI2
→
VIDEO
→
S-VIDEO
→
VIEWER
→
USB DISPLAY
→
COMPUTER
→
...
• With the SOURCE screen displayed, you can press the SOURCE
button a few times to select the input source.
• The Viewer and Network sources are not supported by PE501X.
TIP: If no input signal is present, the input will be skipped.
Using the Remote Control
Press any one of the COMPUTER 1, HDMI, VIDEO, S-VIDEO, VIEWER,
NETWORK, or USB DISPLAY buttons.
NOTE: The HDMI button on the remote control will toggle between “HDMI1” and
“HDMI2”.
[P501X/P451X/P451W/P401W]
[PE501X]
