111
5. Using On-Screen Menu
NOTE:
• When [CONTROL PANEL LOCK], [CONTROL ID], or [AUTO POWER ON(COMP.)] is turned on, the [STANDBY MODE] setting is
not available.
• Even when [POWER-SAVING] is selected for [STANDBY MODE], power on or off can be done by using the PC CONTROL port.
• The power consumption in the standby mode will not be included in calculating CO
2
emission reduction.
• Your setting will not be affected even when [RESET] is done from the menu.
Enabling Direct Power On [DIRECT POWER ON]
Turns the projector on automatically when the power cord is inserted into an active power outlet. This eliminates the
need to always use the POWER button on the remote control or projector cabinet.
Turning On the Projector By Applying Computer Signal [AUTO POWER ON(COMP.)]
When the projector is in Standby mode, applying a computer signal from a computer connected to the COMPUTER
IN input will power on the projector and simultaneously project the computer’s image.
This functionality eliminates the need to always use the POWER button on the remote control or the projector cabinet
to power on the projector.
To use this function, first connect a computer to the projector and the projector to an active AC input.
NOTE:
• Disconnecting a computer signal from the computer will not power off the projector. We recommend using this function in com-
bination of the AUTO POWER OFF function.
• This function will not be available under the following conditions:
- when a component signal is applied to the COMPUTER IN connector
- when a Sync on Green RGB signal or composite sync signal is applied
• To enable the AUTO POWER ON(COMP.) after turning off the projector, wait 3 seconds and input a computer signal.
If a computer signal is still present when the projector is turned off, the AUTO POWER ON(COMP.) will not work and the projector
remains in standby mode.
Enabling Power Management [AUTO POWER OFF]
When this option is selected you can enable the projector to automatically turn off (at the selected time: 5min., 10min.,
20min., 30min., 60min.) if there is no signal received by any input or if no operation is performed.
With the [AUTO POWER OFF] function turned on, the projector will automatically turn off if there is no signal received
by any input or if no operation is performed for a preset period time.
When [VIEWER] or [NETWORK] is selected for [SOURCE] , the [AUTO POWER OFF] function will not work under
one of the following conditions:
When [VIEWER] is selected
While still image files, movie files, or Office files (PowerPoint, Excel, and PDF) are being
played back (playback and stop).
When [NETWORK] is selected
While Image Express Utility 2.0, Image Express Utility Lite, Desktop Control Utility, Network
Projector, or Remote Desktop is being used to send images to the projector over a network.
