109
5. Using On-Screen Menu
Setting HDMI1/2 [HDMI SETTINGS]
Make the settings for each video level when connecting HDMI equipment such as a DVD player.
VIDEO LEVEL ��������� Select [AUTO] to automatically detect video level� If automatic detection may not work well, select [NOR-
MAL] to disable the [ENHANCED] feature of your HDMI equipment or select [ENHANCED] to improve image
contrast and increase detail in the dark areas�
NOTE:
• If the projector does not reflect the settings for your HDMI equipment such as a DVD player connected to the HDMI 1 IN or HDMI
2 IN connector, select the HDMI1 or HDMI2 input source again on the projector.
Setting Audio [AUDIO SELECT]
Make the settings for each audio level when connecting HDMI equipment, your network, and USB (PC) port. Select
between each equipment and computer.
HDMI ��������������������� Select [HDMI1] or [HDMI2] to switch the HDMI 1 or HDMI 2 IN digital audio signal and select [COMPUTER]
to switch the COMPUTER input audio signal�
NETWORK ������������� Select [NETWORK] or [COMPUTER] to switch the source connected to the network� (not supported by
PE501X)
USB DISPLAY �������� Select [USB DISPLAY] or [COMPUTER] to switch the source connected over the USB cable (USB DISPLAY)�
Enabling Key Sound and Error Sound [BEEP]
This feature turns on or off the button sound or alarm when an error occurs or the following operations are performed.
- Displaying the main menu
- Switching sources
- Resetting data by using [RESET]
- Pressing POWER ON or POWER OFF button
[TOOLS] (not supported by PE501X)
See “APPLICATION MENU” on page
.
