NEC ZA-SA3500G, Руководство по эксплуатации функций

Страница: 64 / 359

64 Function Specification |
3.3.12. Application Guard （ APG ）
This restricts the use of application that many unspecified number of individuals can exchange information such as file
sharing, software and video sharing application, messenger application, etc. This prevents the spread of virus and
information leakage from the other party and malicious party who are do not have security measures.
Restricted use of application and traffic is set at Web setting.
[Application and protocol to be detected]
The application and protocol to be detected are regularly updated.
Check the latest information at Web setting.
Refer to Section 5.8.9 for the Web setting confirmation method.
[Behavior of operation and notification when threat is detected]

Block setting
Operation during detection How to notify during detection How to cancel detection state
Communication of a specific
application and protocol is blocked. ・ Log is displayed in the security
log.
(It is necessary to view it in Web
Setting.)
・ Mail Notification *1
・ Lamp display of PATLITE device
*1
－
*1: It must be set at Web setting

Log only setting
Operation during detection How to notify during detection How to cancel detection state
Log output only Log in the security log
(It is necessary to view it in Web
Setting.) －
[How to stop unintended detection]
How to stop Remarks
Stop by using either of the following methods.
● Change the setting of the corresponding application
from the “Application Control List” from “Block” to
“Pass“. (Refer to Section 5.8.9)
● Remove the check on “Enable Application Guard”
from “Application Guard setup” to disable it. (Refer
to Section 5.8.9)
[Note]

APG application name may be displayed in the language of each country.