NEC UX5000, Руководство пользователя

Страница: 499 / 588

Customize
Tenant Options: [Access Digits]
UX Mail Manual Chapter 3: Programming
◆
481
3
● S (Wait for sound)
This command waits 2 seconds for any constant sound (such as non-standard dial tone), and continues
if sound is detected.
● W (Wait for dial tone)
This command waits for CO dial tone, and then continues.
● $ - Not used.
Default
✔
9P
[Access Digits]
Before Long Distance Callout
Use this option to enter the dialing prefix that enables voice mail to seize an outside line to place a long dis-
tance Message Notification callout. Voice mail defines long distance numbers as more than 8 digits long.
●
A typical entry is 9P , where:
- 9 is the trunk access code.
- P is a pause.
Options
● Digits (30 maximum, using 0-9, # and *)
●
N (None)
● A (Analyzed pause)
This command waits for 4 seconds, and then continues if busy tone or reorder tone are not detected.
● F (Flash)
This command hook flashes the voice mail port, which places it on Hold.
- To set the duration of the Flash, go to
[T
IMERS
] F
LASH
T
IMER
(
PAGE
474)
.
●
M (Monitored pause)
This command waits for 2 seconds, and then continues if busy tone or reorder tone are not detected.
●
P (Pause)
This command waits for 2 seconds and then continues. You can enter a pause command anywhere in
the dial string.
● S (Wait for sound)
This command waits 2 seconds for any constant sound (such as non-standard dial tone), and continues
if sound is detected.
●
W (Wait for dial tone)
This command waits for CO dial tone, and then continues.
●
$ - Not used.
Default
✔
9P
[Access Digits]
Network Local Callout
This option is the dialing prefix that enables voice mail to seize an outside line to deliver a network message
to a remote system over a local number. Voice mail defines local numbers as 5-8 digits long.
● A typical entry is 9P , where:
- 9 is the trunk access code.
- P is a pause.
●
See
N
ETWORKING
(AMIS) (
PAGE
236)
for more.
The following toll-free numbers are also considered local callouts:
- 1-800-XXX-XXXX
- 1-877-XXX-XXXX
- 1-888-XXX-XXXX
Options
●
Digits (30 maximum, using 0-9, # and *)
● N (None)
●
A (Analyzed pause)
This command waits for 4 seconds, and then continues if busy tone or reorder tone are not detected.