NEC UX5000, Руководство пользователя

Страница: 355 / 588

Customize
Dial Action Tables
UX Mail Manual Chapter 3: Programming
◆
337
3
Additional Information
● See the detailed Unscreened Transfer Operation call routing chart on page 299.
●
Also see
S
CREENED
T
RANSFER
(
PAGE
270)
,
M
ONITORED
T
RANSFER
(
PAGE
230)
and
U
NSCREENED
T
RANSFER
(
PAGE
299)
.
HUP Action – Hang Up
When an Automated Attendant caller presses a key assigned to this action, UX Mail says “ Goodbye ” and
immediately hangs up.
Number Option
● There is no entry required in the corresponding Number option.
Additional Information
●
See
H
ANG
U
P
(
PAGE
160)
for more.
REC1 Action – Quick Message with Greeting
Use this key action to allow an Automated Attendant caller to leave a Quick Message at an extension. With
this action, the caller
will hear the extension’s greeting prior to leaving the message.
Number Option
●
To have the caller leave a Quick Message at a specific extension, the corresponding Number option
should be the extension number.
●
To have the caller leave a Quick Message at any caller-dialed extension (of any length), the corre-
sponding
Number option should be IV.
●
To have the caller leave a Quick Message at a caller-dialed extension in a specific range, the corre-
sponding
Number option should be XXX. For example, to allow callers to leave a Quick Message for
extensions 300-399, for key 3 enter REC1 in the Action field and XXX in the Number field.
Additional Information
● See
Q
UICK
M
ESSAGE
(
PAGE
261)
for more.
REC2 Action – Quick Message without Greeting
Use this key action to allow an Automated Attendant caller to leave a Quick Message at an extension. With
this action, the caller
will not hear the extension’s greeting prior to leaving the message. Instead, the caller
hears the voice prompt “ Recording,” followed by a beep.
Number Option
● To have the caller leave a Quick Message at a specific extension, the corresponding Number option
should be the extension number.
● To have the caller leave a Quick Message at any caller-dialed extension (of any length), the corre-
sponding
Number option should be IV.
● To have the caller leave a Quick Message at a caller-dialed extension in a specific range, the corre-
sponding
Number option should be XXX. For example, to allow callers to leave a Quick Message for
extensions 300-399, for key 3 enter REC2 in the Action field and XXX in the Number field.
Additional Information
● See
Q
UICK
M
ESSAGE
(
PAGE
261)
for more.
REC1C Action – Quick Confidential Message with Greeting
Use this key action to allow an Automated Attendant caller to leave a Quick Confidential Message at an
extension. With this action, the caller
will hear the extension’s greeting prior to leaving the message.
Number Option
●
To have the caller leave a Quick Confidential Message at a specific extension, the corresponding
Number option should be the extension number.
● To have the caller leave a Quick Confidential Message at any caller-dialed extension (of any length),
the corresponding
Number option should be IV.
●
To have the caller leave a Quick Confidential Message at a caller-dialed extension in a specific range,
the corresponding
Number option should be XXX. For example, to allow callers to leave a Quick
Confidential Message for extensions 300-399, for key 3 enter REC1 in the Action field and XXX in
the Number field.