NEC UNIVERGE WL, Быстрое руководство по установке

Страница: 24 / 34

1-18
UNIVERGE WL Access Point (External-Antenna) Quick Installation Guide
Projection Wall Mount
Projection Wall Mount
When you are mounting the UNIVERGE WL AP out from a wall (flat sides along
the wall or hallway), use an optional factory-orderable projection-mount L-
bracket.
• Before proceeding, gently screw the two factory-supplied screws and
spring washers into the bottom of the UNIVERGE WL AP. Make sure the
spring washers have their convex (high center sections) pointing toward
the screw heads.
Figure - Assembling the Mounting Screws and Spring Washers to the UNIVERGE
WL AP
• Copy the MAC address(es) from the label(s) on the UNIVERGE WL AP
onto the corresponding location on the map. MAC addresses have the
format 000B85xxxxxx.
• You have already attached the projection-mount L-bracket to the wall in
Step 3: Preparing Mounting Locations .
NOTE
The UNIVERGE WL AP threaded holes have precision-depth threads. Do
not overtighten the screws, or the bracket will not fit under the screw
heads.