NEC UNIVERGE UM8500, Руководство по интеграции

Страница: 59 / 352

C
ISCO
C
ALL
M
ANAGER
49
To select which phone system UNIVERGE UM8500 uses
for message notification and MWI
If subscribers use message notification, you can select which phone system
UM8500 uses to dial out when notifying subscribers of new messages. Note that
the changes made to subscriber templates do not affect existing subscribers.
Subscribers with access to the UM8500 Assistant can also change the phone
system used for their message notification.
1
As appropriate, go to:
Subscribers
>
Subscriber Template
>
Devices
Subscribers
>
Subscribers
>
Devices
Subscribers > Subscriber Template > MWI
Subscribers > Subscribers > MWI
2
For each device in the
Switch
list, select the phone system that UM8500 uses
to dial out when notifying subscribers of new messages.
3
Adjust other settings as appropriate. See the System Management Help for
more information.
CAUTION
The selected phone system must have at least one port set to dial
out for message notifications on the
System > Ports page. If the
selected phone system does not have any ports set for this
function, notifications will fail.
Dual-switch integration settings
Page Field Description
System > Switch >
Switch
Access code Type the access code that UM8500 uses when transferring calls
to the IP phone system from the traditional phone system. This
is the same number that subscribers on the traditional phone
system dial to reach someone on the IP phone system.
System > Ports Port assignments Type the range of ports that each phone system uses. The number of
ports available for use by the traditional phone system is determined
by the number of ports on the installed voice boards. The number of
ports available to CallManager is the difference between the number
of licensed voice ports on the system key and the number of ports
assigned to the traditional phone system. Never assign more ports to
the traditional phone system than the number of ports on the voice
boards.
The range of ports for the phone systems cannot overlap and
must be contiguous, which creates a lower and an upper range.
Assign the lower range to the traditional phone system (port 1
through
x , where x is the number of ports on the installed voice
boards), and assign the upper range to CallManager (port x + 1
through y , where y is the number of TAPI ports installed on the
server or the number of licensed voice ports on the system key,
whichever is lower).
Subscribers >
Subscriber Template
> Profile Switch Select the phone system that the subscribers based on this
template will use for their work phones. If this setting is
incorrect, UM8500 will not be able to:
●
Transfer calls to or from the subscriber.
●
Dial the subscriber’s extension for Media Master recording by
phone.
Subscribers >
Subscriber Template
> Devices Switch Select the phone system that UM8500 dials out on when notifying
the subscriber of new messages. Each notification device can be
associated with a specific phone system, except for text pagers.
UM8500 defaults to the phone system specified on the subscriber
template Profile page. On the
System > Ports page, the selected
phone system must have at least one port set to dial out for message
notification.