NEC Univerge UM8000, Руководство пользователя

Страница: 122 / 469

Changing the Public Fax Box System ID 122
Changing the Public Fax Box System ID
The public fax box provides fax detect, routing, and notification for incoming faxes eliminating the need for a dedicated
phone line for a fax machine.
The public fax settings apply to both manual and automatic fax calls.
• Manual Faxes. Callers dial a fax number using the phone keypad on a fax machine and listen to the progress of
their calls on a speaker or handset. When the messaging system answers the call, the caller presses the public fax
box
system ID and records an introductory message and then presses the Send or Start key to send the fax.
• Automatic Faxes. Callers set their fax machines to automatically dial a fax phone number. The messaging
system automatically detects the incoming fax tone and routes the call to the fax machine. Automatic fax routing
requires enabling the CNG tone detection. Enable CNG tone detection on the System Settings page.
See System > Configuration > System Settings .
Faxes cannot be sent directly to a public fax box. Instead the calls are transferred to the public fax system ID:
$FAXBOX. The public fax box can be configured for one-key dialing or by changing the fax box system ID.
NOTE
W
HEN CHANGING THE SYSTEM
ID,
MAKE SURE THAT YOU ALSO UPDATE ALL REFERENCES TO THE SYSTEM
ID.
The public fax box can receive faxes when the system is licensed for fax. However, when fax licensing is not available,
the system must transfer the call to an extension with a fax machine. If transfer is disabled, then the fax will not be
received.
Configuring the public fax box settings:
• Set the extension for faxes.
• Change the call transfer type and number of rings allowed.
• Determine the system response if the fax extension is busy or does not answer.
• Enable callers sending a manual fax to hold.
• Instruct the system to send a public message when a fax call is transferred.
To record or change the name of the public fax box
1.
Connect the fax machine to a phone extension.
2.
In the Navigation Pane, click Call Management > Public Fax Box > Profile .
3.
To change the default fax box name, $FAXBOX, type a new name in the System ID field.
NOTE
W
HEN CHANGING THE SYSTEM
ID,
MAKE SURE THAT YOU ALSO UPDATE ALL REFERENCES TO THE SYSTEM
ID.
4.
Click Voice name to record the name.
5.
Click Save .
Related Topics
Configuring the Public Fax Box Call Transfer Settings
Configuring the Public Fax Box Actions
Routing Callers with One-Key Dialing