NEC Univerge UM8000, Руководство по установке

Страница: 67 / 130

UM8000 Issue No. 1.0
Installation Manual 8 - 11
S
ECTION
5
S
ETTING
U
P
L
IVE
M
ONITOR
Subscribers can listen to a message as it is being recorded in their mailbox by using
the live monitor feature. To monitor messages using a phone, the phone system and
the subscriber’s extension must be configured properly. Use the phone system
programming interface (either a CAT phone or a SV8300 PCPro) to enter the phone
system programming commands.
5.1 Enable Live Monitor on the Phone System
Enable live monitor for the service restriction class.
5.2 Configuring Live Monitor on a Subscriber’s Extension
Do this procedure for each subscriber extension that will use live monitor.
1. Set the live monitor mode for the subscriber’s extension.
2. Enable live monitor pickup.
Command Code: 15186
First Data: xxx
Where < xxx > is the service restriction class.
Second Data: 0
Where 0 enables live monitor and
1 disables live monitor systemwide.
Command Code: 1226
First Data: xxx
Where < xxx > is the subscriber’s
extension number.
Second Data: 0
Where 0 = automatic mode,
1 = manual mode and
3 = off.
Command Code: 1227
First Data: xxx
Where < xxx > is the subscriber’s
extension number.
Second Data: 3