NEC Univerge SV9300, Сетевое руководство

Страница: 60 / 364

Chapter 1 CCIS FEATURES
1-46
NWA-088654-001 Rev.1.0
94ch1002.fm
CCIS BASIC PROGRAMMING
Numbering Plan Assignment
• For open numbering system
DESCRIPTION DATA
Assign the access code for LCR Group 0-3.
NOTE: When providing Attendant Camp-
On with Tone Indication-CCIS, be
sure to set the second data to A129
(LCR Group 3).
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A126: LCR Group 0
A127: LCR Group 1
A128: LCR Group 2
A129: LCR Group 3
Assign an Area Code Development Pattern
number to each LCR Group. •
(1)
(2)
Y=A000
0-3: LCR Group 0-3
4005-4007: Area Code Development pat-
tern No. 5-7
Assign a Route Pattern number to the digits to
be dialed in the Area Code Development Pat-
tern number assigned by CM8A Y=A000. •
(1)
(2)
Y=4005-4007 Area Code Development
Pattern No. 5-7
X-X---X: Area Code 1-8 digits
0000-0255: Route Pattern No. 000-255
Assign an area code for intra-office termina-
tion, if required. •
(1)
(2)
Y=4005-4007 Area Code Development
Pattern No. 5-7
X-X---X: Area Code 1-8 digits
8000: Intra-Office Termination
Assign the next Route Pattern number to the
Route Pattern number assigned CM8A
Y=4005-4007.
NOTE: This data is required to expand the
order of LCR selection that is as-
signed by CM8A Y=0000-0255.
The order of LCR selection can be
expand to the maximum seventh.
•
(1)
(2)
Y=0000-0255 Route Pattern No. 000-255
0: Designation of next table
0000-0255: Next Route Pattern No. 000-
255
START
CM20
CM8A
A