NEC Univerge SV9100, Руководство по аппаратному обеспечению системы

Страница: 400 / 556

Issue 2.0
5-58 Installing DT Series Digital and IP Multiline Terminals
3. Follow the directions below for the type of line key module installed:
4. Save to memory by pressing line key 2, 8, 14 or 20. The display
changes back to the Service Class R/W mode and the Message
Waiting (MW) LED is On Red.
5. Press
Exit
to return the telephone to idle.
4.5.3 Configuring the IP Telephone for the Correct Number of Line
Keys
1. Press
Menu
, then
0
(Config) to enter the terminal program mode.
2. At the Login screen, enter the user name (default = ADMIN) and
password (default = 6633222) and press the
OK
Softkey.
3. Press
3
for Maintenance Setting.
4. Press
4
for Adjust.
5. Press
2
for Key Kit Type.
6. Press the Up/Down key to select the Key Kit.
Table 5-12 Line Key Type
Line Key Type Push
2-Button 1
6-Button 2
8-Button 3
12-Button
4
24-Button 5
Table 5-13 Ten Key Kit Type
Ten Key Kit Entry Description
Kit1 Type A – Japan with cursor key
Kit2 Type A – US with cursor key
Kit3 Type B – US with cursor key
Kit4
Kit8 32 Line Key without cursor key
Kit9 Type A – Japan without cursor key
Kit10 Type A – US without cursor key
Kit11 Type B – US without cursor key
Kit12