NEC Univerge SV8100 VM8000 InMail, Системное руководство

Страница: 119 / 388

VM8000 Issue 1.0
InMail System Guide 2 - 91
External Transfer
Description
External Transfer allows an Automated Attendant caller to automatically route to an
outside telephone number. To set this up, assign a Dial Action Table action as a
UTRF to a Common Abbreviated Dialing bin (e.g., #2000 + Pause for common bin
000). When the Automated Attendant answers, the caller dials the digit and VM8000
InMail automatically routes them to the outside number contained in the bin. External
Transfer allows your callers to easily reach branch offices and important off-site
associates.
Related Features
Dial Action Table
External Transfer uses the active Dial Action Table to route an Automated Attendant caller
to an outside telephone number.
Programming
1. Assign a Dial Action Table to each active Call Routing Mailbox.
47-08-01 Dial Action Table (Dial Action Table)
The Call Routing Mailbox uses the Dial Action Table assignment to provide
dialing options to callers.
The default Call Routing Mailboxes (1~8) use Dial Action Table 1.
2. For an available key, set up a UTRF Dial Action Table option for External
Transfer.
47-13-01 Dial Action Table Actions: UTRF Action - Unscreened Transfer (2)
(UTRF)
The corresponding Number option should be #2 followed by the Common
Abbreviated Dialing bin, followed by two pauses (each pause entered by
pressing
LK4 ).
H
Add additional pauses if the entire common bin does not dial out.
For example, to have External Transfer dial common bin 000, enter
#2000
LK4 LK4
.
This ability is not assigned by default.