NEC SV8500, Руководство по эксплуатации и обслуживанию, Страница: 767 / 975

– 720 –
CHAPTER 7 Maintenance Commands
CARR: Continuous Assignment of Alternative Route Restriction
1. Functional Outline
This command is used to continuously assign/delete the restriction data of relay connections between the
outgoing route and the incoming route.
2. Parameters
Input Data
TYPE: Assign/Delete
ICRT (START/END:Incoming Route Number (External Route only)
OGRT (START/END:Outgoing Route Number (External Route only)
ARI A-RES: Restriction Data for Alternative Route Index-A [0/1]
Restriction of the trunk-to-trunk (tandem) connection via ATTCON or station when a
C.O./TIE line call terminates.
0 = Alternate routing is restricted.
1 = Alternate routing is allowed.
ARI D-RES: Restriction Data for Alternative Route Index-D [0-2]
Restriction of the trunk-to-trunk (tandem) connection by Direct Dial Access from a
station when a C.O./TIE line call terminates.
0 = Alternate routing is restricted.
1 = Alternate routing is allowed.
2 = Toll Restriction is restricted.
Output Data
ICRT: Incoming Route
OGRT: Outgoing Route
STATUS: OK or error message is displayed.