NEC SV8500, Руководство пользователя

Страница: 3103 / 3438

VOL.3-616
CHAPTER 4 CONFIGURATION SETUP
5.3 Ping
On the Ping Menu, send Ping to the specified IP address.
STEP 1:Select “3. Ping” by pressing “3” on the Online Monitoring Main screen.
Online Monitoring Main Screen
Note:
Press Exit key to go back to the normal operation display.
STEP 2:The display changes as follows:
When Network Interface (NI) is running, the screen of (1) appears.
Enter the destination IP address, and then press OK key.
When Network Interface (NI) is not running, the screen of (2) appears.
Even If the notification that Network Interface (NI) starts running is received while displaying (2),
the notification is ignored. To display (1), press Prev key to go back to the Online Monitoring screen,
and then press “3” key again.
STEP 3:After pressing OK key on the screen of Step 2 (1), ping command is sent to the specified IP address. At
this time the destination IP address and the ping sending result are displayed on the LCD. After the
ping is sent four times, “Complete” is displayed in the second line of the LCD. Also, “Prev” and
“Retry” keys appear on the LCD.
“Prev” key : To go back to the Online Monitoring Main screen.
“Retry” key : When Network Interface (NI) is running, the screen of Step 2 (1) appears again.
When Network Interface (NI) is not running, the screen of Step 2 (2) appears.
Up Down
1.QoS
2.System Information
3.Ping
Exit
Prev
DHCP Server Down
OK
Use
′
*
′
For .
PingAdr? XXX.XXX.XXX.XXX
(1) When Network Interface (NI) is running:
(2) When Network Interface (NI) is not running:
BK Prev