NEC SV8500, Руководство пользователя

Страница: 171 / 3438

VOL.1-111
CHAPTER 2 IP-RELATED BASIC FEATURE PROGRAMMING
Note 2:
For DtermIP 8 button-type (ITR-8D), G.723.1 cannot be used.
Note 3:
Payload type G.722 can be used only for:
• The connection between DT700 Series (DT730/DT730G/DT750)
• The connection between DtermSP30 Version 15 and DT700 Series (DT730/DT730G/DT750)
Note 4:
The payload type/payload size depends on the connecting SIP terminals.
Note 5:
Software Tone Generator (IP-DTG) is available since FP85-110 S7. The Payload Type is decided de-
pending on the value for ASYD, SYS1, Index64, bit0=0(
G.711

law)/1(G.711 A law
).
Note 6: T.38UDP is available when the counter IP equipment is set to T.38UDP. T.38UDP cannot be set by
8MC.
Note 7:
10ms is not supported in G.711.
Note 8:
When connecting to public SIP network, assign the following payload type and payload size. FAX con-
nection is not available when any payload types except “G.711” are assigned for voice or fax commu-
nication.
Note 9: Payload size 30ms is available when PROTIMS over IP mode is selected. For SIP mode, Payload size
30ms is not available.
Note 10:
When DtermSP30 is used as an ACD terminal, assign the following payload type and payload size.
Following payload type and payload size are effective only for the connection to DtermSP30 (Version
15 or later), SP350, DT750, DT730, DT730G.
Following payload type and payload size are effective only for the connection to DtermSP30 (Version
15 or later).
Payload Type Payload Size
G.711 20ms
Payload Type Payload Size
G.711 20ms, 30ms,
40ms
G.729a
Payload Type Payload Size
G.722 20ms, 40ms
Payload Type Payload Size
AMR-NB 20ms, 40ms
AMR-WB
G.711

law (FEC)
G.711 A law (FEC)
G.729a (FEC)
G.722 (FEC) *
AMR-NB (FEC)
AMR-WB (FEC)