NEC SV8500, Руководство пользователя

Страница: 1570 / 3438

VOL.2-1317
MG-T1(SIP) [SCA-24DTIA]
Note:
To make this assignment effective, execute the SAVE command and restart before exiting the maintenance
command.
10. SET
Δ
IPPADDRESS
Δ
P1
Δ
P2
This command is used to set IP address and subnet mask of MG-T1(SIP). Be sure to assign this data when
static addressing is used in the network. This data can be set also in
SETUP SP command.
Note:
The designated IP address cannot be applied when DHCP is set to “Enabled.” Be sure to assign the DHCP
setting to “Disable” before performing this IP address assignment.
Note:
Do not assign network address and broadcast address for MG-T1(SIP). See the examples below:
(Example 1) Network address cannot be assigned as IP address of MG-T1(SIP).
IP address: 192.168.1.0
Subnet mask: 255.255.255.0
(Example 2) Network address cannot be assigned as IP address of MG-T1(SIP).
IP address: 172.16.0.0
Subnet mask: 255.255.0.0
(Example 3) Broadcast address cannot be assigned as IP address of MG-T1(SIP).
IP address: 192.168.1.255
Subnet mask: 255.255.255.0
(Example 4) Broadcast address cannot be assigned as IP address of MG-T1(SIP).
IP address: 172.16.255.255
Subnet mask: 255.255.0.0
Note 1:
To make this assignment effective, execute the SAVE command and restart before exiting the maintenance
command.
11. SET
Δ
ONE_TIME_PASS
This command is used to assign one-time password for security.
MG-T1(SIP)> SET IPADDRESS 10.41.1.100 255.255.255.0
P1 : Enter the IP address of MG-T1(SIP)
e.g. 10.41.1.100
P2 : Enter the subnet mask
e.g. 255.255.255.0
IP Address setting succeeded.
Result is displayed.
MG-T1(SIP)> SET ONE_TIME_PASS
One Time Password:
•••••
Enter the password in numeric [4~10 digits (0-9,
*, # is available)]
e.g. 12345#
Erase start...
Erase OK!
Write start...
Write OK!
One time password setting succeeded.
Result is displayed.