manualshive.com logo in svg

NEC SV8300, Руководство по программированию ПК, Страница: 96 / 232

Поделиться
Скачать
NEC SV8300 Скачать руководство пользователя страница 96

Chapter 4 Standard Mode

4-50

NWA-033628-001 Rev.1.0

[Upgrade] Category

NOTE 4:

You can confirm the status of program upgrade by the S1 lamp of CPU blade.

Set a Schedule

You can enter and read FTP server information, the upgrade date and time and change over date and
time for each unit on which the CPU program is upgraded.

STEP1:

Click the [Scheduling] tab.
The [Scheduling] screen is displayed.

Upgrade Status

S1 Lamp Status 

(Green)

Under Upgrading

Flash quickly

Program upgrade is completed

Remain Lit

Program changeover is completed

Disappear

Upgrade fails/Upgrade is interrupted

Flash normally

Under program copying from upgraded side to outdated side

Flash slowly

Program copy from upgraded side to outdated side is completed

Disappear

(1)

(7)

(6)

(2)
(3)
(4)

(5)

Содержание SV8300









































































































































































































































Отзывы:

Нет отзывов