NEC SV8300, Руководство по программированию ПК, Страница: 73 / 232

Chapter 4 Standard Mode
4-27
NWA-033628-001 Rev.1.0
[Implement] Category
Blade Configuration
The [Blade Configuration] menu lets you register additional blades, update data on pre-registered data, de-
lete blade information and so on for each Unit. One of the following action will display the [Blade Con-
figuration] screen in the work window:
• Click submenu [Blade Configuration] in Standard Mode.
• On the Main Menu, click [Edit] > [Blade Configuration] in this order.
Continued on next page
No. Item Description
(1) Unit No. field Select the unit number of the SV8300 from which you want to read infor-
mation.
• 01 to 50 (default: 01)
(2) [Change Unit Num-
ber] buttons Click to change the number entered in the Unit No. field.
• [Previous] button: Decrement the number by one.
• [Next] button: Increment the number by one.
(3) Blade Display Area View this area to confirm blade mounted in the individual slots in the
SV8300 or register new blade. Blade names are marked in different col-
ors by blade type.
• Station blade
: Light blue
• Trunk line blade : Light yellow
• Other blades : Light red
• Blade without set system data : White
(1)
(3)
(2)
[Blade Configuration]
Menu
(6)
(5)
(4)