manualshive.com logo in svg

NEC SV8300, Руководство по программированию ПК, Страница: 147 / 232

Поделиться
Скачать
NEC SV8300 Скачать руководство пользователя страница 147

Chapter 5 System Data Mode

5-3

NWA-033628-001 Rev.1.0

Using System Data Mode

Using System Data Mode

Configuring System Data

Follow instructions below to configure system data in System Data Mode.

STEP1:

Click submenu

 

 in System Data Mode to expand the tree and then click the command you 

want to configure.
A screen is displayed for configuring the selected command.

NOTE:

Items marked by 

 

 /

 

  will not invoke a setup screen when they are clicked.

STEP2:

Click the [Read] button.
If a number is available that serves as a key, such as CM12 or 18, enter it and click the [Read] 
button.

 

NOTE:

When clicking the [Read] button on the [System Data] screen, the reading out data is stored in 
the install folder as the script files. This script files can be re-used by Scripts (

 

Page 4-66

 

).

<install folder>\pbxfiles\system data\<Name of Connection Accounts>

Содержание SV8300









































































































































































































































Отзывы:

Нет отзывов