NEC SV8300 Скачать руководство пользователя страница 106 | Manualshive

Страница: 106 / 232

NEC SV8300 Скачать руководство пользователя страница 106

Chapter 4 Standard Mode

4-60

NWA-033628-001 Rev.1.0

[Upgrade] Category

Program Upgrade (Off-line)

Allows you to upgrade the software on the CPU program off-line mounted in the SV8300 by using a Up-
grade program downloaded onto PCPro.
For information on specifying a FTP server, see “FTP Server”

The [Program Upgrade (Off-line)] menu allows you to upgrade Program Upgrade (Off-line).

Tips:

Firmware Program Upgrade

While line/trunk blade firmware is included as part of the CPU program, simply upgrading the
CPU program will not upgrade the firmware. To upgrade firmware, finish upgrading the CPU
program first and upgrade the firmware with CME8Y=0. For more details, refer to the “Firm-
ware Program Upgrade”.

NOTE 1:

Be sure to insert the LAN cable into the ETHERNET port of the CPU blade.

NOTE 2:

You can confirm the status of program upgrade by the S1 lamp and ALM lamp of CPU blade.

STEP1:

Connect the ETHERNET port of the CPU blade mounted on the SV8300 and the LAN Port of
PCPro directly with a LAN cable.

STEP2:

Check that the communication link with the SV8300 is cleared.

Upgrade Status

S1 Lamp Status

(Green)

ALM Lamp Status

(Red)

Under Upgrading

Flash qickly

Disappear

Program upgrade is completed

Remain lit

Disappear

Upgrade fails/Upgrade is interrupted

Disappear

Remain lit

SV8300 (FTP Client)

PCPro

(FTP Server)

(2) File Transfer demand

LAN cable (cross/straight cable)

Upgrade Program

(CD-ROM)

(3) File Transfer

(1) Set the SENSE switch on the CPU blade to 8
(Program Upgrade Mode: Off-line) and then
reset the system to start updating the program.

«
...
104
105
106
107
108
...
»

Содержание SV8300









































































































































































































































Отзывы:

Нет отзывов