CHAPTER 3 TERMINALS
Issue 5
UNIVERGE NEAX 2000 IPS General Description
Page 69
3.3 Dterm IP Terminals
DtermIP terminals are designed to provide ergonomic form and user-friendly functions.
DtermIP terminals offer an adjustable LCD display unit with menu-driven soft key
operation, allowing users to program terminals at the desktop. The LCD panels are
equipped with three lines of display, each with 245 characters. Standard features include
headset jacks, wall mounts and adjustable base units.
DtermIPs has four soft keys located just under the display of each terminal. These menu-
driven soft keys allow user’s convenient access too many telephony features. According
to the status of the multi-line terminal, functions of the soft keys are displayed in the third
line on the LCD. If the status of the terminal changes, the soft keys displayed will change
automatically.
Dedicated function keys provide easy one-touch access to the most common telephone
operations. These keys include: feature, recall conference, redial, hold, transfer, answer,
speaker, microphone, directory and message.
Convergence Features
Two 10/100 full duplex Ethernet ports- One which connects the Dterm IP to the
local Ethernet network, the other provides connectivity for a local workstation.
Three types of powering options
o
Local AC adapter
o
Cisco Inline Power (Cisco discovery protocol CDP) for those
infrastructures with an installed base of Cisco gear
o
Spare pair power across the Ethernet network.
Transportable QoS, which follows the user no matter where they log in.
Multiple Voice Coding support, which automatically negotiates to a common
setting.
G.711 providing an international standard for encoding/ decoding telephony
signals on a 64 Kbps non compressed channel.
It also supports the compression algorithms G.729A (8Kbps) and G.723.1 (5.3/6.3
Kbps).
Automatic Login to Home Station Number (R12.2)
Prior to R12.1, an IP terminal with MAC Address Authentication Mode can be
temporarily used as a terminal with Password Authentication Mode (Login/Logout
Mode). In this case, once the IP terminal with MAC Authentication Mode is logged out,
a user have to login by manual operations. In R12.2 software, new operation mode is
added: Fixed Connection Mode. In this mode, an IP terminal works as follows.
An IP terminal is normally used like MAC Authentication Mode (no need to login /
logout operation).
If necessary, the terminal can be temporarily logged out and can be used as someone’s
own terminal by login with his/her station number & password. After he/she logged
out the terminal, the terminal is automatically logged in to the home station number
(e.g. conference room telephone).
Maximum 256 IP terminals can be assigned for the Fixed Connection Mode telephone.
The Dterm SP30 (Soft Phone) will require future ver.11 or later to support this feature.
Dterm IP Program Download
