Enter value
0 - 0 sec
1 - 0.3 sec(*)
2 - 0.6 sec
3 - 0.9 sec
Press
MIC
to store the data
Press
SPKR
to go back on line
Note: (*) indicates default value
1-13 : Intercom Call Signal
This Memory Block area is used to specify the type of signal to be received on
internal calls (Tone or Voice). The originating user can alternate between the two by
dialing "1" when calling.
Enter system programming mode
Press Line Key 1
Dial
1 3
Enter value
0 - Tone(*)
1 - Voice
Press
MIC
to store the data
Press
SPKR
to go back on line
Note: (*) indicates default value
1-18 : Ringing Tone Transfer
This Memory Block area is used to Allow or Deny Ringing Tone Transfer from all
Key Telephones
•
Enter system programming mode
•
Press Line Key 1
20
