19
1
Turn the power on and immediately press <F2> key several times.
The BIOS setup utility will then be started.
2
When the BIOS setup utility is displayed, quickly insert the "Recovery
Disc" into the optical drive.
3
Press the <F10> key.
4
Confirm that [Yes] is selected and then press <Enter>.
5
Turn on the power and immediately press <F12> key several times.
The [Sartup Device Menu] is displayed.
6
From the [Startup Device Menu], select the optical drive using <
> or <
>
key, and press <Enter>.
7
When the [Windows Recovery] screen is displayed, select [Erase data on
the hard disk], and press <Enter>.
8
When [Data stored on the hard disk drive will be erased. Are you sure to
continue?] is displayed, select [Yes] and then press <Enter>.
9
Select a hard disk to delete its data, and click [Next].
10
Select a data deletion method, and click [OK].
11
When [Starting to erase HDD data. Is it OK?], click [Yes].
12
When [Completed] is displayed, click [OK].
13
Remove the "Recovery Disc" from the optical drive and press <Enter>.
Following the above steps will complete data deletion on the hard disk.
Recovery
Here we will explain the basics before recovery. Please read this before performing
recovery.
When recovering from a DVD, the following materials are required. Prepare all of the
materials before starting the process.
• Recovery Disc
Before recovery, if there is data that you would like to maintain, make a backup of
the data and then perform recovery.
Once recovery is performed, all the settings including system configuration will
be reset to the factory default settings. If you would like to use the current
settings again after recovery, such as BIOS setup utility settings and network
settings, make a note of the current settings.
Before recovery, please be sure to load the factory default settings for the BIOS
setup utility.
How to Delete Data from the Hard Disk
Remove peripheral devices and return it to the state it was in at the time of purchase.
If it stops deleting data, turn on the power with the "Recovery Disc" inserted in the
optical drive. It will automatically resume from where it stopped.
Recovery Basics
Required Materials
The Recovery Disc is not included with models MC32M/B-H and MC34L/B-H.
Backup Data from the Hard Disk
For multi-user computers, each user should logon and make personal backups.
Maintain System Settings
Returning the BIOS Utility Settings to the Original Values
If you are using the security chip function on the MG32M/B-H or MG34L/B-H, be sure
to initialize the security chip using the BIOS setup utility before the computer recovery.
For the security chip initialization, please refer to "Before sending your computer for
repair" (p.17).
13
