NEC PH3501QL, Руководство пользователя

Страница: 58 / 173

41
3. Convenient Features
❾
Adjusting the brightness [LIGHT MODE]
When the light mode is set, you can adjust the output of the unit to a range of 30* - 100% (in increments of 1%) and
control the brightness after adjustment to keep it constant.
* PH2601QL: 40%
There are two ways to set the light mode.
Function name Description Page
REF. LIGHT MODE Adjust the brightness and save it as a common value for all input signals.
Valid when the [MODE] (
→
page 77 ) is set to [STANDARD].
97
LIGHT MODE Adjust the brightness and save it for each input signal.
Valid when the [MODE] (
→
page 77 ) is set to [PROFESSIONAL].
79
1. Press LIGHT ADJ button on the cabinet.
• In another way, press ECO/L-SHIFT button on the remote control.
When [STANDARD] is selected for [MODE]
The [REF. LIGHT MODE] screen will be displayed.
When [PROFESSIONAL] is selected for [MODE]
The [LIGHT MODE] screen will be displayed.
2. Press the
◀▶
button to adjust.
To keep the brightness after adjustment constant, set [CONSTANT
BRIGHTNESS] to [ON].
Press the MENU button to cancel the menu screen.
TIP:
• Brightness normally decreases with use, but by selecting [CONSTANT BRIGHTNESS] mode, sensors inside the projector detect
brightness and automatically adjust the output, thereby maintaining a constant brightness throughout the life of the light module.
However, if output is already at its maximum, brightness will decrease with use.