1
1. Before Setting Up Your Projector
1-1. Clearance for Installing the Projector
Allow ample clearance between the projector and its surroundings as shown below.
Avoid installing the projector in a place where air movement from the HVAC is directed at the projector.
Heated air from the HVAC can be taken in by the projector’s intake vent. If this happens, the temperature inside the
projector will rise too high causing the over-temperature protector to automatically turn off the projectors power.
Installation conditions for the projector
Example 1 – If there are walls on both sides of the projector.
The drawing shows the proper clearance required for the front, back and top of the projector.
30 cm/11.8"
or greater
30 cm/11.8"
or greater
Ventilation
(inlet)
Ventilation
(inlet)
Example 2 – If there is a wall behind the projector.
The drawing shows the proper clearance required for the front, sides and top of the projector.
(1) For floor installation:
70 cm/27.6"
or greater
Ventilation
(outlet)
Lens
(2) For ceiling mounting:
30 cm/11.8"
or greater
70 cm/27.6"
or greater
Lens
