NEC PA803UL, Руководство пользователя

Страница: 33 / 196

16
2. Projecting an Image (Basic Operation)
❸
Turning on the Projector
1. Remove the lens cap.
2. Press the (POWER) button on the projector cabinet
or the POWER ON button on the remote control.
WARNING
The projector produces a strong light. When turning on
the power, make sure no one within projection range is
looking at the lens.
The POWER indicator lit in green will start to blink in blue.
After that, the image will be projected onto the screen.
TIP:
• When the message “PROJECTOR IS LOCKED! ENTER YOUR
PASSWORD.” is displayed, it means that the [SECURITY]
feature is turned on. ( → page 41 )
After you turn on your projector, ensure that the computer
or video source is turned on.
NOTE: A blue screen (blue background) is displayed when no signal
is being input (by factory default menu settings).
Sleep state Blinking Power On
Blinking in green
Blinking blue
light
Steady blue
light
(
→
page 165 )
Performing Lens Calibration
After mounting the separately available lens unit or replacing
a lens unit, perform [LENS CALIBRATION] by holding to press
ZOOM/L-CALIB. button on the cabinet over two seconds.
Calibration corrects the adjustable zoom, shift, and focus
range. If calibration is not performed, you may not be able to
get the best focus and zoom even if you adjust the focus and
zoom for the lens.