8
Quick Setup Guide
EN
⓪
Install the batteries in the remote control.
• Install new batteries (AAA). Do not mix different types of batteries or new and old batteries.
• Ensure that you have the batteries’ polarity (+/−) aligned correctly.
➊
Connect your computer to the projector using the computer cable (VGA). (Not
supplied)
➋
Connect the supplied power cord.
Make sure that the prongs are fully inserted into both the AC IN terminal and the wall outlet.
❸
Remove the lens cap.
With the lens cap’s stopper pressed up, pull forward and off.
❹
Turn on the projector.
WARNING
The projector produces a strong light. When turning on the power, make sure no one within
projection range is looking at the lens.
1. Press the
(POWER) button on the projector cabinet or the POWER ON ( ) button on the
remote control.
❺
Select a source.
Detecting the Signal Automatically
1. Press the INPUT button on the projector cabinet or press the SOURCE button on the remote
control.
The projector will search for the available input source and display it.
Using the Remote Control
1. Press any one of the HDMI1, HDMI2, HDBaseT, COMPUTER, USB-A, or APPS buttons.
TIP. Adjusting the Image Using Auto Adjust
Optimizing a computer image automatically. (COMPUTER)
Press the AUTO ADJ. button on the remote control.
❻
Adjust an image size and position.
CAUTION
Perform the adjustment from behind or from the side of the projector. Adjusting from the front
could expose your eyes to strong light which could injure them.
LENS SHIFT
1. Open the lens shift cover.
2. Turn the lens shift dials clockwise or
counterclockwise.
(Horizontal)
(Veritical)
3. Close the lens shift cover.
FOCUS
1. Turn the focus ring.
ZOOM
1. Turn the zoom lever.
TILT FOOT
1. Turn the left and right tilt foot to adjust.
❼
Turn off the projector.
1. Press the
(POWER) button on the projector cabinet or the STANDBY( ) button on the
remote control.
The confirmation message will be displayed.
2. Press either the
(POWER) or the STANDBY( ) button again.
When the light source turns off, the power turns off too (standby mode).
