NEC NVM-2000, Инструкция по замене

Страница: 10 / 17

Replacing the Hard Drive in the NVM-2000
6
Install the Replacement Hard Drive
To install the replacement hard drive:
1.
Carefully slide the replacement hard drive into the cage assembly.
Be sure to line up the screw holes on the hard drive with the screw
slots on the cage assembly. See Figure 5.
2. Secure the hard drive in place with the four screws (removed and
retained in step 10 of Remove the Old Hard Drive). See Figure 5.
3. Plug the ribbon cable and the power supply connector into the new
hard drive. See Figure 5.
Important: Be sure that the red stripe on the ribbon cable is
closest to the power supply connector wires.
Figure 5