NEC NRS Expanded Series, Руководство по настройке

Страница: 93 / 280

ISSUE 1.0
NVR Configuration Guide (Advanced) for NRS Expanded Series 4-9
2.9 One-touch Park
Certain models of the speed dome can be configured to automatically start a
predefined park action (e.g., scan, preset, patrol and etc.) after a period of
inactivity (e.g., park time).
1. Select one of the following to access the PTZ settings menu in Live View
mode:

Click the PTZ button in the lower-right corner of the PTZ settings screen.

Press the PTZ button on the front panel.

Click the PTZ Contro l icon in the quick setting bar.
2. Click the button to show the general settings of the PTZ control.
3. There are three selectable one-touch park types. Click the corresponding
button to activate the park action.

Park (Quick Patrol): The dome starts patrol from the predefined Preset 1
to Preset 32, in order, after the park time expires. An undefined preset is
skipped.

Park (Patrol 1): The dome starts move according to the predefined patrol
1 path after the park time.

Park (Preset 1): The dome moves to the predefined Preset 1 location
after the park time.
4. Click the button again to inactivate it.
NOTE

Before operating this function, make sure the connected camera supports
the linear scan and is in HIKVISION protocol.
Figure 4-12 PTZ Panel – One-Touch
NOTE

The park time can only be set through the speed dome
configuration interface. By default, the value is 5s.