background image

ISSUE 1.0

NVR Configuration Guide (Advanced) for NRS Expanded Series

9-13

S

ECTION

 17  PIR A

LARM

The PIR (Passive Infrared) alarm is triggered when an intruder moves within the 
detector’s field of view.  The heat energy dissipated by a person or any other warm-
blooded creature such as dogs, cats, etc. can be detected.  

1.

Access the 

VCA

 settings screen:

Menu

 -> 

Camera

 -> 

VCA

 

2.

Select the camera to configure the VCA.
Check the 

Save VCA Picture

 checkbox to save the captured pictures of the VCA 

detection.

3.

Select VCA detection type: 

PIR Alarm

.

4.

Click 

 

to configure the trigger channel, arming schedule and linkage actions for 

the PIR alarm.

5.

Click the 

Rule Settings

 button to set the audio exception rules. Refer to the 

Section 

3 Face Detection on page 9-2

 for instructions.

6.

Click 

Apply

 to activate the settings.

Содержание NRS Expanded Series

























































































































































































































































































Отзывы: