NEC NP901W, Руководство пользователя

Страница: 116 / 166

102
6. Using On-Screen Menu
[WIRED]
PROFILES (for LAN port [RJ-45]):
Up to two settings for the LAN port (RJ-45) can be stored in memory of the projector.
Select [PROFILE 1] or [PROFILE 2] and then do settings for [DHCP] and the other options.
After doing this, select [OK] and press the ENTER button. This will store your settings in memory.
To recall the settings from memory:
After selecting the [WIRED] tab, select the [PROFILE 1] or [PROFILE 2] from the [PROFILES] list.
Select [OK] and press the ENTER button.
DHCP:
Enabling this option automatically assigns an IP address to the projector from your DHCP server.
Disabling this option allows you to register the IP address or subnet mask number obtained from your network
administrator.
IP ADDRESS .......... Set your IP address. Press to display the software keyboard and type in 12 numeric characters.
SUBNET MASK ...... Set your subnet mask number. Press to display the software keyboard and type in 12 numeric characters.
GATEWAY .............. Set the default gateway of the network connected to the projector. Press to display the software keyboard
and type in 12 numeric characters.
DNS CONFIGURATION .. Type in the IP address of DNS server on the network connected to the projector. 12 numeric characters
are used.
RECONNECT .......... Use this button to retry to connect the projector to a network. Try this if you have changed [PROFILES].