NEC NP-PA600 Series, Руководство пользователя

Страница: 22 / 29

22
5. Performing Stacking/Tiling Correction
1. Start the Multi Screen Tool
2. Select the Projectors
Select [Communication Settings] of the [Op-
tions] menu, then
❶
select the network type,
❷
enter a check mark for the projectors that
will be used, click [Connect], and add to the
list.
* U p to four projectors can be used for stacking/
tiling correction.
3. Select the [GEOMETRIC
CORRECTION] data storage location
The default setting is [1].
In the projector, GEOMETRIC
CORRECTION data has already been
registered in 1 to 3 as the default setting.
The existing GEOMETRIC
CORRECTION data of the selected
number will be overwritten in the saving
location by the Multi Screen Tool.
Preparations: Connect the web camera
to a computer on which the Multi
Screen Tool and the web camera's utility
software are installed, then connect
the computer to the same LAN as the
projectors.
Connection of the Equipment Page 13
To the USB port of the computer
Note
❶
❷