NEC NP-LV01BD Скачать руководство пользователя страница 54

Страница: 54 / 173

3. Convenient Features

❹

Muting the Image (AV Mute)

Press the AV-MUTE button to turn off the image for a short period of time.
Press again to restore the image.

TIP:

• The image will disappear but not the menu display.

❺

Turning Off the On-Screen Menu (On-Screen Mute)

A press of the ON-SCREEN button on the remote control will hide the
on-screen menu, the source display and other messages. The SHUT-
TER indicator will turn on in orange. Press again to restore them. The
SHUTTER indicator will turn off.

SHUTTER indicator

TIP:

• To confirm that the on-screen mute is turned on, press the MENU button. If the on-screen menu is not displayed even though

you press the MENU button, it means the on-screen mute is turned on.

• The on-screen mute is maintained even when the projector is turned off,

• Holding down the MENU button for at least 10 seconds will turn off the on-screen mute.

Содержание NP-LV01BD














































































































































































Результаты поиска

Содержание NP-LV01BD

Отзывы:

Бренды по названию

Популярные бренды

NEC NP-LV01BD, Руководство пользователя

Результаты поиска

Содержание NP-LV01BD

Отзывы:

Бренды по названию

Популярные бренды