NEC NEAX2400 ICS, Руководство по программированию

Страница: 683 / 1089

NEAX2400 IPX Feature Programming Manual
Page 640
NDA-24297, Issue 1
S-1 Single-Digit Station Calling
S-1 Single-Digit Station Calling
General Description
This feature allows the assignment of single digits for station numbers.
Operating Procedure
1. Lift the handset; receive dial tone.
2. Dial the Single-digit (preprogrammed) telephone number.
3. The desired service station will be rung.
Service Conditions
1. The single-digit number must be different from the first digit of trunk access codes, service feature access
codes and other telephone numbers.
2. Timing start is not available with this feature.
Interactions
For each station with single-digit access, an entire number level is eliminated. Do not plan to have more than one or
two such phones in a system.
Programming
STEP 1: ASYD
- System Data 1, Index 16, Bit 0. Assign this Bit as data “1” enabling single-digit station
numbers.
STEP 2: ANPD - Reserve a number level for station access. Assign an NND = 1, and BLF is on.
STEP 3: ASPA - For the desired station number assign SRV = STN (Station). NND is not required. Assign
Connection Indexes (CI) of Normal (N) and Hooking (H).
STEP 4: ASDT
- Assign the station number to a specific station within the system.
FCCS Programming
This data setting describes only the additional or replacement commands used to activate FCCS
services. When used as an FCCS feature, these commands replace the non-network commands (for
example, AAED is replaced by AAEDN). Note that the data setting for FCCS service varies depending
on the node.
Note
STEP 1: ANPDN - Reserve a number level for station access. Assign an NND = 1, and BLF is on.
STEP 2: ASPAN
- For the desired station number assign SRV = TELN (Telephone Number). NND is not
required. Assign Connection Indexes (CI) of Normal (N) and Hooking (H).
STEP 3: ALGSN
- Assign Type = 2 / UGN1
TELN = Station Number/Telephone Number
FPC = “x”
Tenant and Station assigned by ASDT
Note: When using ASYDL or ASYDN to program an FCCS feature, the basic programming of ASYD is required
in addition to ASYDL or ASYDN.