NEC NEAX2400 ICS, Руководство по программированию

Страница: 672 / 1089

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 629
Route Restriction - Announcement R-27
R-27 Route Restriction - Announcement
General Description
This feature permits a station-originated call, dialed to a restricted outgoing number, to be automatically routed to a
recorded announcement informing the caller that the dialed number is restricted. (TOLL RESTRICTION [T-7])
Operating Procedure
No manual operation is required after this feature has been programmed in system data.
Service Conditions
1. This service feature is available when a station-originated call encounters a restriction.
2. Access to the announcement of this service feature is restricted by MISCELLANEOUS TRUNK
RESTRICTION [M-3].
3. The announcement machine can be provided on a per-tenant basis.
4. The availability of this service cannot be determined for each originating route.
5. TOLL DIVERSION [T-6] takes precedence over this feature.
6. Digital Announcement Trunk (DAT) and the calling station must be accommodated in the same node
within the FCCS network.
Programming
STEP 1: ASYD - System Data 2, Index 1, Bit 4, 5. Toll Restriction (disposition of Restricted Call) Assign Bits
4 and 5 as “0”.
STEP 2: AAED
- Equipment type 7 = Outgoing Route Restriction Announcement
Also see ANNOUNCEMENT SERVICE [A-60] for programming of announcement and
MISCELLANEOUS TRUNK RESTRICTION [M-3] for trunk restriction programming.