NEC NEAX2400 ICS, Руководство по программированию

Страница: 285 / 1089

NEAX2400 IPX Feature Programming Manual
Page 242
NDA-24297, Issue 1
C-133 Call Forwarding - Don’t Answer To UCD Queue
C-133 Call Forwarding - Don’t Answer To UCD Queue
General Description
This feature allows calls to a station that has set CALL FORWARDING-DON'T ANSWER to a UNIFORM CALL
DISTRIBUTION group to be added to a UCD queue if all stations in the UCD group are busy. (Originally, calls
forwarded to a UCD group would receive reorder tone if all stations in the group were busy.)
Operating Procedure
The operating procedure is the same as for normal CALL FORWARDING-DON'T ANSWER [C-3] operation.
Service Conditions
1. This feature is available in the U. S. A. and Canada and only works in the following cases:
a.) Station call to a station that has set CALL FORWARDING-DON'T ANSWER to a UCD group.
b.) Trunk call to a station that has set CALL FORWARDING-DON'T ANSWER to a UCD group.
c.) Attendant transfers a station or trunk call to a station that has set CALL FORWARDING-DON'T
ANSWER to a UCD group.
2. This feature is not applicable with calls on CONSULTATION HOLD [C-17] or CALL TRANSFER [C-
10, C-11].
Programming
No additional programming is required once UCD parameters are assigned.
FCCS Programming
No unique programming is required for the FCCS network.