NEC NEAX2400 ICS, Руководство по программированию

Страница: 263 / 1089

NEAX2400 IPX Feature Programming Manual
Page 220
NDA-24297, Issue 1
C-60 Call Forwarding - Busy Line - Outside
C-60 Call Forwarding - Busy Line - Outside
General Description
This feature allows a call that originates from a station or trunk, and is destined for a station to be routed to another
station outside the NEAX2400 IPX via the appropriate trunk line. This service feature can also be activated from a
D
term
multi-line.
Operating Procedure
To set
1. Lift the handset; receive dial tone.
2. Dial the CALL FORWARDING - BUSY LINE - OUTSIDE access code (same as CALL FORWARDING
- BUSY LINE [C-2]); receive special dial tone.
3. Dial the desired target telephone number (or Speed Calling access code and abbreviated code). If the
ATTENDANT CONSOLE [A-3] is setting this feature, dial the access code, tenant number, originating
telephone number, and then the desired outside number; receive service set tone.
To cancel
1. Lift the handset; receive dial tone.
2. Dial the CALL FORWARDING - BUSY LINE - OUTSIDE cancel code, (same as CALL
FORWARDING - BUSY LINE [C-2] cancel code); receive service set tone.
To set from a multi-line D
term
1. Press the multi-line feature key to be used for CALL FORWARDING - BUSY LINE - OUTSIDE.
2. Lift the handset or press the SPEAKER key; receive dial tone.
3. Press CALL FORWARDING - BUSY LINE - OUTSIDE feature key; receive special dial tone.
4. Dial the desired target number (or Speed Calling access code and abbreviated code); receive service set
tone. The LED will light. The LCD displays:
5. Replace the handset or press the SPEAKER key.
6. The LED of the associated feature key lights on the D
term
for which this multi-line is the MY Line.
To monitor from a D
term
MY Line
1. Press the multi-line key of the station CALL FORWARDING - BUSY LINE - OUTSIDE is to monitor.
2. Press CALL FORWARDING - BUSY LINE - OUTSIDE feature key.
3. The LCD displays:
Target Number*
Note: *An entered abbreviated number is translated into the forwarding number and the first eight digits are
displayed even if a maximum of 24 digits can be stored.
FORWARD SET
(Time Display)
FORWARD XXXXXXXX
(Time Display)