NEC NEAX2400 ICS, Руководство по программированию

Страница: 107 / 1089

NEAX2400 IPX Feature Programming Manual
Page 64
NDA-24297, Issue 1
A-99 Authorization Code Display Elimination
A-99 Authorization Code Display Elimination
General Description
This feature eliminates AUTHORIZATION CODE [A-20] and FORCED ACCOUNT CODE [F-7] from being
displayed on the D
term
for security purposes.
Operating Procedure
Procedure 1
(Access code for auth code/forced account code) + (SST) + (auth code/forced account code) + (DT) + (OG
access code) + (OG code)
Dial: (DT) - 10 + (SST) - 1234 + (DT) - 9 - 753 - 7000
Display on D
term
is: 10XXXX97537000
XXXX = authorization code/forced account code
Procedure 2
(OG access code) + (OG code) + (SPDT) + (auth code/forced account code)
Dial: (DT) - 9 - 753 - 7000 + (SPDT) - 1234
Display on D
term
is: 97537000XXXX
XXXX = authorization code/forced account code
Service Conditions
1. When the station dials the AUTHORIZATION CODE/FORCED ACCOUNT CODE, Xs appear on the
display.
2. LAST NUMBER CALL [L-6] and SAVE AND REPEAT - D
term
[S-24D] features keep dialed
information, but display Xs when these feature keys are pressed.
3. SPEED CALLING SYSTEM - D
term
[S-3D] feature keeps dialed digits, and all digits are displayed at the
same time when this feature key is pressed.
4. ACCOUNT CODE [A-18] is displayed on D
term
.
5. This feature applies only to the calling party’s D
term
.
6. This feature applies for the following dialing procedures:
7. If the network is connected by a trunk (including a CCIS trunk), and AUTHORIZATION CODE/
FORCED ACCOUNT CODE is requested at the other node, this function is not applied.
8. The calling party needs to confirm SPDT/SST if AUTHORIZATION CODE/FORCED ACCOUNT
CODE is required. The first digit of AUTHORIZATION CODE/FORCED ACCOUNT CODE may or
may not be recognized as AUTHORIZATION CODE/FORCED ACCOUNT CODE, if the inter-digit
timing immediately before the AUTHORIZATION CODE/FORCED ACCOUNT CODE is too short.
Programming
ASYD - Assign SFI 137 = 1 to the originating terminal.
PROCEDURE BEFORE DIALING AFTER DIALING
OG access without held party Yes Yes
OG access with held party Yes Yes
Attendant No No