19
Instructions
18
This devices need to be installed
into IBM compatibly computers
with min. 500 MHz CPU,
64Mbyte RAM and 700Mbyte
free space on the non removable
disk (or as external solution
connected via USB2 or IEEE1394
to such kind of PC).
Software
To proceed with LabelFlash™ you
need the Software NeroExpress
version 6.6.1.3d (or a more recent
version), which is part of this bundle.
Regarding the system requirements
please refer to the NeroExpress
manual chapter 2.1.
Disc
For marking the label side special
LabelFlash™ DVD-R and/or DVD +R
media is required.
The data side can be inscribed on
any DVD-R and/or DVD +R media
– subject to following conditions:
1. only the outer area of a DVD
will be used for labelling –
otherwise it will not be possible
to burn in addition data to
this media.
2. the data area and the label area
do not overlap – otherwise the
affected data will no longer be
readable.
3. the larger the disc area
inscribed the less space there
will be available for data.
4. the readability of the inscription
depends on the production
process of the media (though
the contrast will not be as
great as that of the incription
on the label side Labelflash™
media).
Overview
With the new LabelFlash™ DVD Writer
from NEC DVD-R and DVD +R media
can be labelled inside the drive (no
marker or printer are necessary).
The labelling can be done post or
before burning. For the inscription
of the DVD label side are special
LabelFlash™ necessary. In
addition the unused area of the
data side of the media can be
utilised for inscription.
Caution!
If you inscribe the data side you
have to take care that the data
area and the label do not overlap
- otherwise the data on the
media no longer be read.
Because the labelling surface is
covered by 0.6mm thick
transparent plastic the inscription
is very durable, robust against
mechanical damages and
extremely light stable.
Either the user can determine
very fast labelling (less than
7 minutes for a complete label) –
or he is able to set to more high
levels of inscription contrast.
The inscription area can be
decided by user freely between
the inner radius of 25mm and the
outer radius of 58mm – but the
minimum area width is 5mm (on
the data side the most meaningful
way is to inscribe just the outer area).
System requirements
Hardware
In order to take advantage
of the LabelFlash™ inscription
function requires one the
following NEC DVD Writers:
HH:
ND-4551, ND-3551
Slimline: ND-7551, ND-6751
