NEC N8551-29F, Инструкция по эксплуатации

Страница: 40 / 56

22 Built-In AIT Auto-Loader Unit
Version
- Display the setting status -
When selecting “Version” from the menu screen, the sub
menu as shown at right appears.
On this screen, you can check the Built-In AIT Auto-Loader
Unit’s model code, preset SCSI ID number and firmware
version.
After checking the data displayed, press the EJECT button.
The “Version” sub menu returns to the menu screen.
Auto Load
– Auto Load settings –
When selecting “Auto Load” from the menu screen, the sub
menu appears as shown on the right.
On this screen, you can set operations for the first cartridge
after you have inserted the magazine.
OFF: Only checks the cartridges in the magazine. (Default
setting)
Use this mode for normal operation.
ON: The first cartridge is automatically loaded into the
read or write drive after the cartridges in the magazine
have been checked.
1
Press the SELECT button to place the cursor ( ) at the required item. To cancel the selection
and return to the menu screen, press the EJECT button.
2
By pressing the ENTER button after selection, the setting value is saved and the menu screen
appears again.
TSL-A500C
SCSI ID#5
Ver. 0000
Firmware version
SCSI ID number
Model code
Auto Load
OFF
ON