NEC N8190-131, Руководство пользователя

Страница: 42 / 48

Appendix Confirm WWPN addresses after setup
You can confirm WWPN addresses of this product after install this product into the computer.
If you have not installed this product yet, please refer to "4-2. Confirm WWPN addresses (Port 0/Port 1)"
and confirm WWPN addresses from IEEE addresses.
Confirm WWPN at the computer boot
1> Confirm that this product is properly installed. Then, turn on the computer.
Hint
„
If the logo is displayed but the BIOS window is not, press <ESC> key to
display it.
2> Hold <Alt> key and press <E> key while the following message is displayed. Then, you see this
product’s BIOS menu.
!!! LPe11002-M4 BIOS, Copyright(c) 2005 Emulex!!! version1.70a3
Press <Alt E> to go to Emulex BIOS Utility
Press <S> to skip Emulex BIOS
„ This product’s BIOS settings window consumes a lot of memories. Therefore,
depending on your environment (for example, an expansion board is consuming a
lot of memories), this window may not be displayed or you may not be able to
change the settings. In such a case, disable the extended ROM unnecessary on
computer or take other countermeasures. Refer to the computer’s User’s Guide
for how to disable the extended ROM.
Important
3> When the computer detects that <Alt> and <E> keys are pressed, you see the following messages
and the menu.
Bring the Link up, Please wait…
Bring the Link up, Please wait…
- 40 -