NEC N8160-48, Руководство пользователя

Страница: 60 / 96

58 Safety Consideration
For Correct Operation
To oper ate the N8160-48 Exter nal AIT correctly , obser ve the f ollowing points . For consider ations
on handling the AIT data car tridge , refer to the chapter “AIT Data Car tridge”.
• Set the N8160-48 External AIT’s SCSI ID so that it will not duplicate with SCSI ID of other
SCSI equipment.
→
Otherwise, an operation error will occur.
• Do not turn off the basic processing unit when the BUSY LED on the front of the External AIT
is blinking.
→
This may cause a machine failure or damage of backup data.
• Do not store the External AIT in a place subject to corrosive gas, chemicals or splash of
chemicals.
→
An External AIT part may be deformed or damaged and may not be able to operate correctly.
• Do not store the External AIT in a place subject to strong vibrations.
→
This may cause a machine failure.
• As the data cartridge set in the External AIT, use our “AIT Data Cartridge (model: AIT2,
AIT1)”.
→
If you use a data cartridge of other manufacturer, a read/write error may occur.
• Clean the External AIT on a regular basis.
→
For details about cleaning the External AIT, see “Cleaning” (page 76).
• When cleaning the External AIT, use our “AIT Cleaning Cartridge”.
→
If you use a cleaner of other manufacturer, a machine failure may occur.
• Do not transport the External AIT with a data cartridge inserted.
→
Shocks may damage the External AIT and/or data cartridge.
• Eject the data cartridge when you are not using the External AIT or before you turn it off.
→
This may shorten the operational life of the data cartridge and/or cause malfunctions.
• Do not leave when the dust cover is open for prolonged periods.
→
This may cause malfunctions.