NEC N8100-1909F Скачать руководство пользователя страница 94

Страница: 94 / 126

6. Details of EXPRESSBUILDER

Express5800/E120d-M Maintenance Guide

Chapter 2 Convenient Features

Details of EXPRESSBUILDER

EXPRESSBUILDER helps you to install an OS or check the server. Bundled software and documents are
provided in EXPRESSBUILDER.

6.1

Starting EXPRESSBUILDER

Use a DVD (labeled as EXPRESSBUILDER) that comes with your server to start EXPRESSBUILDER.

(1) Insert the DVD to the optical disk drive of the server, and then reboot by turning off and on the server or

by pressing <Ctrl> + <Alt> + <Delete> keys.

Boot Selection Menu shown in

Chapter 2 (

6.2 Menu - (1) Boot Menu) appears.

Tips

Remove other removable media before rebooting the server.

(2) Insert the DVD into a computer on which operating system is running.

Autorun Menu shown in

Chapter 2 (6.2 Menu - (3) Autorun Menu)

appears.

6.2

Menu

EXPRESSBUILDER is operated by using onscreen menus.

(1)

Boot Selection Menu

When EXPRESSBUILDER starts from DVD, below menu appears.

Use the upper and lower arrow keys to move the cursor, and then press <Enter> key to select it.

Os installation

(default) is selected if no key is pressed.

Os installation

is selected, Top menu shown in

(2) Top Menu

appears after confirmation of Windows PE

software license.

Tool menu (Normal mode)

is selected, Tool Menu shown in

(3) Tool Menu

appears. Select this mode

normally.

Tool menu (Redirection mode)

is selected, you can operate EXPRESSBUILDER remotely by using BIOS

Console Redirection feature. In this mode, the menu items and the tools that can be activated are the same as
those in normal mode.

Tips

Be sure to select Normal Mode when using the remote KVM feature.

Os installation *** default ***
Tool menu (Normal mode)
Tool menu (Redirection mode)

Boot selection

Содержание N8100-1909F































































































































Результаты поиска

Содержание N8100-1909F

Отзывы:

NEC N8100-1909F, Руководство по обслуживанию, Страница: 94 / 126

Результаты поиска

Содержание N8100-1909F

Отзывы: