English-58
Using the “SET/POINT ZOOM” button on the remote control enlarges part of the screen image.
Press the CH+/- button to zoom in or out. The image can be expanded up to 10 times.
1 Press the [SET/POINT ZOOM] button on the remote control. The icon looks like a magnifier.
2 Move the magnifier icon with the [ ] [ ] [+] [-] buttons.
3 Press the [CH+] to zoom in. Press [CH-] to zoom out.
4 Press the [SET/POINT ZOOM] to let the icon disappear.
5 Press the [EXIT] to return to the normal image size.
6 Press the [MENU] to open the OSD menu.
NOTE:
• When using this function, the image may look distorted.
• This function is not available when set to [IMAGE FLIP] (except for [NONE]), [MULTI PICTURE MODE],
[SCREEN SAVER], [SUPER] in [INPUT CHANGE], [TILE MATRIX] and [TEXT TICKER].
• When [DYNAMIC] or [ZOOM] is selected in [ASPECT], the image will change to [FULL]. Then start with
POINT ZOOM.
After exiting POINT ZOOM, [ASPECT] will return to the previous [ASPECT] settings. When [ASPECT] is changed
during the POINT ZOOM operation, [DYNAMIC] and [ZOOM] will be set to [FULL] image.
• The magnifier icon does not move to a no image area.
• POINT ZOOM returns to the normal image size after changing the input signal or when the monitor is powered off.
• POINT ZOOM will become inactive when changing the [ASPECT] setting during the POINT ZOOM operation.
• When the POINT ZOOM is active, the STILL function is not available.
• POINT ZOOM is not available when [MODE2] in [HDMI] in [TERMINAL MODE] and with a 3840 x 2160 (60 Hz)
DisplayPort signal.
POINT ZOOM
