background image

English−7

 CAUTION

8

REQUIRED

Incorrect usage of batteries can result in leaks or bursting.
•  Insert batteries matching the (+) and (–) signs on each battery to the (+) and (–) signs of 

the battery compartment.

•  Do not mix battery brands.
•  Do not combine new and old batteries. This can shorten battery life or cause liquid 

leakage of batteries.

•  Remove dead batteries immediately to prevent battery acid from leaking into the battery 

compartment.

•  Do not touch exposed battery acid, it may injure your skin.
•  Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a 

battery, that can result in an explosion.

•  Leaving a battery in an extremely high temperature surrounding environment, or a 

battery subject to extremely low air pressure, that can result in an explosion or the 

leakage of flammable liquid or gas.

•  Contact your dealer or local authorities when disposing of batteries.

9

REQUIRED

Suitable for entertainment purposes at controlled luminous environments, to avoid disturbing 

reflections from the screen.

10

REQUIRED

When running the cooling fan continuously, we recommend wiping clean the ventilation 

holes a minimum of once a month. Failure to do so could lead to fire or electric shock or 

damage to the product.

11

REQUIRED

To ensure the product’s reliability, please clean the ventilation holes at the rear side of the 

cabinet at least once a year to remove dirt and dust. Failure to do so could lead to fire or 

electric shock or damage to the product.

12

REQUIRED

Avoid locations with extreme temperatures and humidity. Failure to do so could lead to fire 

or electric shock or damage to the product. The usage environment for this product is as 

follows:
•  The operating temperature: 0 °C to 40 °C/32 °F to 104 °F/  

humidity: 20 to 80% (without condensation)

•  The storage temperature: -20 °C to 60 °C/-4 °F to 140 °F/  

humidity: 10 to 80% (without condensation)

Power Cord Table

Plug Type

North America

European 

Continental

U.K.

Chinese

Japanese

Plug Shape

Region

U.S.A./Canada

EU

U.K.

China

Japan

Voltage

120*

230

230

220

100

*  Please use this power cord under 125 V power supply. 

NOTEN:  

This product can only be serviced in the country where it was purchased.

Содержание MultiSync M751



















































































































Отзывы: