background image

 

 1

 

NEC Display Solutions of America, Inc.

 

www.necdisplay.com

 

OL

-

431

 

 

 

IR Touch Overlay

 

Installation Guide for the OL

-

431

 

Rev 1.1

 

1.0  Contents

 

Guide Purpose

 

Page 1

 

Notes and Warnings

 

Page 1

 

Equipment

 

Page 2

 

Dimensional Drawings

 

Page 2

 

Installation Procedure

 

Page 3

 

2.0  Purpose

 

2.1   This procedure describes the steps to install the IR touch overlay onto the C431 display.

 

3.0  Notes and Warnings

 

3.1

 

Prior to installing the overlay, remove the NEC badge from the bottom edge of the monitor. 

 

3.2

 

The overlay contains tempered glass.  Use caution when handling.

 

3.3

 

The overlay has an integrated USB cable located along the bottom edge of the overlay.  Ensure the 

 

cable is not pinched, crushed, or damaged during installation.

 

3.4

 

Installation requires two persons at all times to ensure the touch frame does not bend or torque.

 

3.5

 

Once the touch screen is installed, do not lift the monitor by grasping or holding the touch screen 

 

overlay.

 

3.6

 

Contact NEC Display Solutions support if you have any questions or require additional installation 

 

guidance support.

 

 

500 Park Boulevard, Suite 1100

 

 

Itasca, IL 60143

 

 

Phone:  (800) 632

-

4662

 

Содержание MultiSync C431

Страница 1: ...he bottom edge of the monitor 3 2 The overlay contains tempered glass Use caution when handling 3 3 The overlay has an integrated USB cable located along the bottom edge of the overlay Ensure the cable is not pinched crushed or damaged during installation 3 4 Installation requires two persons at all times to ensure the touch frame does not bend or torque 3 5 Once the touch screen is installed do n...

Страница 2: ...splay com OL 431 NEC Display Solutions of America Inc IR Touch Overlay Installation Guide for the OL 431 Rev 1 1 4 0 Equipment 5 0 Dimensional Drawings 1 C431 IR Overlay 1 Spare 6 32 Philips flathead machine screw ...

Страница 3: ...s screwdriver to remove the three 3 6 32 flathead screws securing the bottom bracket to the overlay 6 2 1 Do NOT remove any remaining screws from the overlay 6 4 Use a cloth and mild cleaner to clean the monitor and inside surface of the overlay 6 4 1 Do not use any chemical solvents such as acidic or alkali solutions 6 4 2 If available use compressed air after cleaning to remove any lint or dust ...

Страница 4: ...ce Step 6 5 1 Step 6 5 2 Step 6 5 3 6 6 Be sure the USB cable is toward the bottom of the monitor and is not crushed or pinched during installation 6 7 Be sure not to scratch or damage the monitor or glass surface while installing the overlay 6 8 Double check the monitor panel and overlay glass for dirt smudges or dust before securing the overlay to the monitor 6 9 Return the bottom bracket to its...

Отзывы: