Introduction to Your MobilePro Power System 1
Introduction to Your
MobilePro Power System
Congratulations on purchasing the NEC MobilePro™ Professional PC
Companion powered by the Microsoft
®
Windows
®
CE operating system.
The portability and capabilities of this device, including instant-on and
easy synchronization to your PC, allow you to keep your most important
business and personal information up-to-date and close at hand.
Be sure to read the contents of this document for information about
maximizing the device’s power capabilities.
CAUTION
If you power off, then quickly power on the NEC
MobilePro, your system may erroneously report the
presence of PC cards and/or CompactFlash cards.
In addition, quickly pressing the POWER key several
times in a few seconds (repeatedly powering the unit
off and on), may cause PC card and/or CompactFlash
card data loss. NEC recommends that you wait ten
seconds after powering off, before powering on the
NEC MobilePro.
Windows CE Operating System
The Windows CE operating system and pre-loaded applications are stored
on a Read-Only Memory (ROM) module. ROM modules are electronic
circuits that cannot crash. Files cannot be added or deleted from ROM, by
a user, and removing power from your MobilePro unit has no adverse
effect on ROM storage.
Additional program applications and files that you add to your MobilePro
are stored in Random Access Memory (RAM). The RAM in your
MobilePro is protected when the unit is running on battery power or
plugged into an AC power source. To ensure the safety of your data and
user installed software, please carefully follow the battery charging
instructions.
