NEC ME342U, Руководство пользователя

Страница: 110 / 146

7. Connecting to a Network
99
3
NETWORK SETTINGS
Move the cursor to [ NETWORK SETTINGS] at the bottom right of the start-up screen and press the ENTER button
to display the [NETWORK SETTINGS] screen.
①
⑤ ⑥
② ③ ④
①
INFORMATION
Displays information regarding the wired LAN and wireless LAN of the projector.
• To return to the NETWORK SETTINGS screen, press the EXIT button.
②
NAME
Sets the PROJECTOR NAME and HOST NAME.
Item name Description
PROJECTOR NAME Set the PROJECTOR NAME.
• Initial value: “PJ-XXXXXXXXX”
The initial value “PJ-XXXXXXXXX” represents the “PJ-” + “Serial Number”.
• Allowable characters: alphanumeric symbols (including space)
• Number of characters: 1–16 characters
HOST NAME Set the HOST NAME.
• Initial value: “pj-XXXXXXXXX”
The initial value “pj-XXXXXXXXX” represents the “pj-” + “Serial Number”.
• Allowable characters: alphanumeric, “-”
NOTE:
• You can not enter “-” at the beginning or end of the HOST NAME.
• Number of characters: 1–16 characters
③
WIRED LAN
Configure the PROFILE of the wired LAN, DHCP, IP ADDRESS, SUBNET MASK, GATEWAY, DNS and so on.
• When using a wired LAN, set the PROFILE to [ENABLE] and configure the necessary settings.
• If you are not using a wired LAN, set the profile to [DISABLE].
• Once you have configured the settings, move the cursor to [OK] and press the ENTER button.