User’s Manual
（
Preliminary
）
IECUBE2 main (QB-V850E2)
ZUD-CD-10-0092 13/19
1.3.7
Event link function (event combinations)
The event link function is used to combine into one event, events that have been registered by using the event
function. It is used to detect a specific sequence, such as when an address has been executed after a variable was
accessed.
1.3.8
Peripheral break function
When the break function has been used to stop program execution, peripheral functions other than the watchdog
timer continue to operate in general, but some peripheral functions can be stopped by using the peripheral break
function. Refer to POD user’s manual which peripheral functions can be stopped.
1.3.9 Mask
function
The mask function can be used to mask the following sources.
- _RESET terminal
- internal reset (For example, watch dog timer)
1.4 Block
Overview
An internal block overview of the functions is described as below.
Figure 1-3. System Configuration
IECUBE2 main
POD
Debug chip
Signals
of target
device
via sockets
Oscillator
Control signals
for debug chip
include trace
information
via cable of
IECUBE2
FPGA
USB
Block
Trace
Memory
Firmware
Target
System
IECUBE2 main
POD
Debug chip
Signals
of target
device
via sockets
Oscillator
Control signals
for debug chip
include trace
information
via cable of
IECUBE2
FPGA
USB
Block
Trace
Memory
Firmware
Target
System
1.5 Package
Contents
QB-V850E2 package includes the items below. The list contains only items which are delivered commonly to all
regions and that depending on region more items may be available. Therefore, confirm that the items in the attached
packing list.
Products supplied with QB-V850E2
1:
IECUBE2
main
2:
USB interface cable
3:
Stick for unplugging EA from POD
4:
Table of Toxic and Hazardous Substance and Elements
